Huawei Honor 6X Screen Repair, Teardown and Reassemble
Huawei Honor 6X Screen Repair, Teardown and Reassemble Guide
Recommended Tools:
Plastic Triangle Opening Tool
Nylon Spudger
SIM Card Ejection Tool
Fine Tip Curved Tweezers
2mm Red Adhesive
Multi-Purpose Heat Gun
Professional T5 Torx Screwdriver
Professional Phillips Screwdriver
Step 1
Power down your Huawei Honor 6X phone.
Step 2 (Huawei Honor 6X SIM and microSD Tray)
Eject the dual Nano-SIM and microSD card tray.
Step 3 (Huawei Honor 6X Rear Case)
Use the plastic triangle opening tool to release the clips and pop the Huawei phone out of its metallic rear enclosure.
The cable for the fingerprint scanner is still connected to the motherboard, so don’t try to remove it entirely just yet.
Remove the following 5 Phillips screws and then the metal bracket.
Disconnect the cable and separate the Honor 6X rear case from the phone.
Step 4 (Huawei Honor 6X Motherboard)
Starting with the Huawei Honor 6X battery connector, spudge up the bevy of cables from the motherboard.
Remove the following 4 Phillips screws.
Carefully free the Honor 6X motherboard from the gob of thermal paste securing it to the midframe.
Step 5 (Huawei Honor 6X Dual-Lens Rear-Facing Camera and Front-Facing Camera)
Detach the dual-lens 12-megapixel plus 2-megapixel Honor 6X rear-facing camera from the motherboard.
Remove the 8-megapixel Huawei Honor 6X front-facing selfie camera.
Step 6 (Huawei Honor 6X Daughterboard and Loudspeaker Assembly)
Remove the following 5 Phillips screws and 2 T5 Torx screws.
Pry up the bracket that includes the spring-contact-connected Honor 6X vibrator.
Extricate the interconnect cable and then pop the coaxial cable off the daughterboard.
Easily remove the Huawei Honor 6X daughterboard and loudspeaker assembly from the phone.
Detach the loudspeaker and then separate the daughterboard. It includes the Honor 6X micro USB port, microphone, spring contacts, and some control hardware.
Step 7 (Huawei Honor 6X Battery)
With the spudger in hand, free the 3340 milliampere-hour (mAh) Honor 6X battery from the adhesive securing it to the midframe.
Step 8 (Huawei Honor 6X Earpiece Speaker and Power and Volume Buttons Cable)
Pluck the Huawei Honor 6X earpiece speaker out of the chassis.
Use the tweezers to remove the power and volume buttons cable from the side of the midframe.
Step 9 (Huawei Honor 6X Display Assembly)
Use the heat gun to warm up the adhesive securing the 5.5” full HD Huawei Honor 6X display assembly to the frame.
Start slicing through the adhesive with the triangle opening tool. Take your time and apply additional heat as needed.
Once you have sliced through the adhesive, be mindful of the display’s cable when decoupling the Huawei Honor 6X screen from the frame.
* To reassemble your device, follow the steps in reverse order.