OnePlus 3 Battery Repair

OnePlus 3 Battery Repair Guide

Find brand new, fully tested OnePlus 3 replacement screens and parts here.

Recommended Tools:

Plastic Triangle Opening Tool
T2 Torx Screwdriver
Nylon Spudger
SIM Card Ejection Tool
Fine Tip Curved Tweezers
Professional Phillips Screwdriver

Step 1

Power down your OnePlus 3 phone.
Step 2 (OnePlus 3 Dual Nano-SIM Card Tray)
Remove the dual Nano-SIM card tray.
Step 3 (OnePlus 3 Rear Case)
Remove the following 2 T2 Torx screws from the bottom of the OnePlus 3.
Use the plastic triangle opening tool to release the clips and then pop the OnePlus 3 out of its metal rear enclosure. There is no pesky adhesive, making this procedure a snap.

Step 4 (OnePlus 3 Battery)
Disconnect the OnePlus 3 battery from the logic board.
Remove the following Phillips screw, and then the metal bracket.
Detach and remove the interconnect cable.
Detach the USB-C port cable from the logic board.
Use the exposed clear plastic pull tab to peel the 3000 milliampere-hour (mAh) battery off the adhesive securing it to the OnePlus 3.
* To reassemble your device, follow the steps in reverse order.

You can save time by selecting any number of products from this page and then add them all to the cart with just one click.