Motorola Moto Z Droid Display Assembly Repair
Motorola Moto Z Droid Display Assembly Repair Guide
Find brand new Motorola Moto Z Droid replacement screens and parts here.
Power down your Motorola Moto Z smartphone.
Step 2 (Motorola Moto Z Droid Nano-SIM and MicroSD Card Tray)
Eject the Nano-SIM and Micro SD Card Tray.
Step 3 (Motorola Moto Z Droid Display Assembly)
The Moto Z 5.5-inch AMOLED display is glued on solidly and is a tight fit within the frame. Apply heat to soften the adhesive.
With the precision knife carefully create separation and insert a triangle opening tool to start slicing through the adhesive.
Take your time and apply additional heat as needed.
When attacking the adhesive, be mindful of the fingerprint reader.
The Motorola Moto Z screen is still connected to the motherboard. Do not try to remove it completely, or you will damage the data cable connecting the display to the middle of the phone.
Extract the Moto Z display cable bracket.
Use the spudger to disconnect the display cable and remove the Motorola Moto Z display assembly.
Step 4 (Motorola Moto Z Droid Fingerprint Reader and LED Flash)
Remove the Kapton tape and release the ZIF connector.
Carefully separate the Moto Z Droid fingerprint reader from the front panel.
Use the spudger to pry up the LED flash.
* To reassemble your device, follow the steps in reverse order.