Use the heat gun to warm up the adhesive securing the Droid Turbo 2 rear cover to the midframe.
With the precision knife, carefully create separation and insert a plastic triangle opening tool to start slicing through the adhesive. Take your time and apply additional heat as needed. The adhesive securing the cover is relatively mild, once the pick sneaks into the seam, the cover can be peeled up. Step 4 (Motorola Droid Turbo 2 Midframe)
Remove the following 17 T4 Torx screws.
Use the tweezers to remove the 2 plastic covers and then detach the connectors underneath.
You can now easily separate the Droid Turbo 2 midframe.
Step 7 (Motorola Droid Turbo 2 Front-Facing Camera and Earpiece Speaker)
Peel up the black tape.
Remove the following 2 T4 Torx screws, and then the bracket.
Disconnect the Droid Turbo 2 battery from the motherboard.
Use the spudger to detach and remove the 5 MP Droid Turbo 2 front-facing selfie camera.
Utilizing the tweezers, pry up the earpiece speaker.
Step 8 (Motorola Droid Turbo 2 Motherboard)
Disconnect the bevy of cables from the motherboard.
With the cables detached, carefully free the Motorola Droid Turbo 2 motherboard from the display assembly.
Step 10 (Motorola Droid Turbo 2 Battery)
With a little spudgering the 3760 milliampere-hour (mAh) Droid Turbo 2 lithium-ion battery can be removed.
* To reassemble your device, follow the steps in reverse order.
You can save time by selecting any number of products from this page and then add them all to the cart with just one click.
Are you sure you want to add the available quantity?