Huawei Nexus 6P Front-Facing Camera and Headphone Jack Repair

Huawei Nexus 6P Front-Facing Camera and Headphone Jack Repair Guide

Find high quality, affordable Google Nexus 6P replacement screens and parts here.

Recommended Tools: 

Plastic Triangle Opening Tool
Nylon Spudger
SIM Card Ejection Tool
Fine Tip Curved Tweezers
Precision Knife Set
2mm Premium Red Adhesive
Multi-Purpose Heat Gun
Professional Phillips Screwdriver
Playing Cards

Step 1

Power down the Huawei Nexus 6P smartphone.
 
Step 2
 
Eject the Nexus 6P Nano SIM card tray.
 
Step 3
 
Apply heat to the plastic panel located at the bottom of Google phone.
 
Insert the precision knife underneath the plastic panel and create enough space to fit a playing card.
 
Work the playing card under the plastic panel and remove it from the Nexus 6P. Apply additional heat as needed.
 
Now turn your attention to the tight-fitting, glass panel at the top of the Google phone. Apply heat and then with the precision knife create enough space to fit a playing card.
 
Carefully slide a playing card under the glass panel and peel it off. Apply additional heat as needed.
 
With the fine tip curved tweezers remove the 2 tamper evident seals.
 
Remove the following 6 Phillips screws.
 
Use the precision knife to create space and insert a plastic triangle opening tool.
 
Use the triangle opening tool to release the clips and pop the Nexus 6P out of its rear enclosure.
 
Step 4
 

Remove the following Phillips screw and then the metal bracket.
 
Detach the battery connector from the motherboard.
 
Disconnect the signal cable from the Nexus 6P motherboard.
 
Remove the following 2 Phillips screws.
 
Use the tweezers to remove the metal bracket protecting the Nexus 6P front-facing camera and headphone jack.
 
With the spudger detach the headphone jack from the motherboard and remove it from the Nexus 6P.
 
Step 5
 
Disconnect and pull out the Huawei Nexus 6P 8-Megapixel front-facing selfie camera.


* To reassemble your device, follow the steps in reverse order.