Easily remove the Stylo 2 rear battery cover. No tools necessary!
Extract the 3000 milliampere-hour (mAh) LG Stylo 2 battery.
Slide out the Nano-SIM card.
Step 4 (LG Stylo 2 Exterior Midframe)
Remove the following 11 Phillips screws.
Use the triangle opening tool to work around the LG phone and free the exterior midframe. Step 5 (LG Stylo 2 Loudspeaker) Eradicate the Stylo 2 loudspeaker from the midframe. Step 6 (LG Stylo 2 Rear-Facing Camera and Front-Facing Camera)
Remove the 13-megapixel Stylo 2 rear-facing camera.
Spudge up the 5-megapixel LG Stylo 2 front-facing camera. Step 7 (LG Stylo 2 Motherboard)
Disconnect the display cable and then lift out the Stylo 2 motherboard.
With the tweezers in hand, pluck out the Stylo 2 earpiece speaker, vibrator and headphone jack.
Step 9 (LG Stylo 2 Display Assembly)
Peel the display cable up from the midframe. Begin to free the 5.7-inch Stylo 2 LCD assembly by using the heat gun to warm up the adhesive.
With the precision knife, carefully create separation and insert a playing card to start slicing through the adhesive securing the display to the interior midframe. Take your time and apply additional heat as needed. Once you have sliced through the adhesive, be mindful of the display cable when decoupling the LG Stylo 2 screen from the frame.
* To reassemble your device, follow the steps in reverse order.
You can save time by selecting any number of products from this page and then add them all to the cart with just one click.
Are you sure you want to add the available quantity?