iPhone X Screen Repair Guide

iPhone X Screen Repair Guide

Find affordable iPhone X replacement screens and parts here.

Recommended Tools: 

Plastic Triangle Opening Tool
Nylon Spudger
SIM Card Ejection Tool
Fine Tip Curved Tweezers
Precision Knife Set
Pentalobe Screwdriver
Tri-Point Screwdriver
Display Assembly Adhesive

Step 1
 
Power down your Apple iPhone X smartphone.
 
Step 2
 
Eject the Nano-SIM Card Tray.
 
Step 3 (iPhone X Display Assembly)
 
Remove the bottom 3.4mm Pentalobe screws located next to the lightning connector.
 
Apply some heat and then use the precision knife to create enough space to insert a triangle opening tool.
 
With the opening tool slice through the adhesive and carefully decouple the iPhone X display assembly from the rear case. Now the standard, it opens to the side.
 
The display assembly is still connected to the iPhone by cables, so don’t try to remove it entirely just yet.
 
Remove the following 5 Tri-Point screws securing the bracket that covers every logic board connector. These screws are different sizes, so be sure to remember where they go.
 
With the unibracket out of the way pry the battery and display cables up from the logic board and free the 5.8” all-screen OLED Super Retina HD Display from the phone.
 
Step 4 (iPhone X Upper Display Component Assembly)
 
Remove the following 3 Tri-Point screws.
 
Use the spudger to help extricate the upper display component assembly. It includes the loudspeaker, microphone, ambient light sensor, flood illuminator, and proximity sensor.
 
 
* To reassemble your device, follow the steps in reverse order.