iPhone 6s Plus Rear-Facing Camera Repair
iPhone 6s Plus Rear-Facing Camera Repair Guide
Find high quality, affordable iPhone 6s Plus replacement screens and parts here.
Power down your iPhone 6s Plus.
Remove the two bottom 3.4 mm Pentalobe screws located next to the lightning connector.
Place a suction cup near the home button and pull the iPhone 6s Plus display assembly away from the rear case. Use the iSesamo opening tool to slice through the adhesive and help carefully separate the display assembly from the rear case.
Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices and is held down with adhesive.
The display assembly is still connected to the iPhone by several cables, so don’t try to remove it entirely just yet.
Remove the following 5 Phillips screws securing the metal cover to the iPhone's motherboard.
Now use the fine tip curved tweezers to disconnect the LCD, digitizer and front camera and proximity sensor cables.
Remove the following 3 Phillips screws securing the protective metal bracket in place.
With the fine tip curved tweezers detach the iPhone 6s Plus rear-facing camera connection and gently pry the rear-facing camera up and out of the iPhone's rear case.
* To reassemble your device, follow the steps in reverse order.