HTC One A9 Battery Repair

HTC One A9 Battery Repair Guide

Find fully tested, affordable HTC One A9 replacement screens and parts here.

Recommended Tools:

Nylon Spudger
SIM Card Ejection Tool
Fine Tip Curved Tweezers
Precision Knife Set
2mm Premium Red Adhesive
Multi-Purpose Heat Gun
Professional T5 Torx Screwdriver
Professional Phillips Screwdriver
Playing Cards

Step 1 

Power down your HTC One A9 smartphone.
Step 2 (HTC One A9 Nano SIM Card Tray and microSD Card Tray)
Eject the Nano SIM card tray and then the microSD card tray.
Step 3 (HTC One A9 Display Assembly)
Begin to free the HTC One A9 display assembly by using the heat gun to warm up the adhesive.
With the precision knife carefully create separation and insert a playing card to start slicing through the adhesive.
Take your time and apply additional heat as needed.
When attacking the adhesive, be mindful of the capacitive home button and fingerprint sensor.
The HTC One A9 screen is still connected to the motherboard. Do not try to remove it completely, or you will damage the data cable connecting the display to the middle of the phone.
Remove the following 2 Phillips screws securing the bracket to the motherboard.
Remove the HTC One A9 display cable bracket.
Use the spudger to disconnect the display cable and remove the HTC One A9 display assembly.
Step 4 (HTC One A9 Midframe)
Remove the following 8 T5 Torx screws.
Use the precision knife and a triangle opening tool to pop the HTC One A9 midframe out of the rear enclosure.
Step 5 (HTC One A9 Battery)
Spudge up the HTC One A9 battery connector from the motherboard.
Peel the 2150 milliampere-hour (mAh) HTC One A9 battery off the adhesive securing it to the phone.
* To reassemble your device, follow the steps in reverse order.


You can save time by selecting any number of products from this page and then add them all to the cart with just one click.