iPhone 6s Plus Glass Lens Screen Repair Kit + Tools + Video Guide - Black
- Apple iPhone 6s Plus
- iPhone 6s Plus A1634
- iPhone 6s Plus A1687
- iPhone 6s Plus A1699
- iPhone 6s Plus 16, 64 and 128 GB Models
- High-end glass lens screen repair kit for iPhone 6s Plus
- Stuffed with every necessary tool including Small Phillips Screwdriver, Small Flathead Screwdriver, iPhone 5-Point Pentalobe Screwdriver, Plastic Opening Tools, Suction Cup, Nylon Spudger, Fine Tip Curved Tweezers, Micro Fiber Cleaning Cloth, SIM Card Ejection Tool
- Video guide will show you each step of the repair process
- Manufactured for iPhone 6s Plus
- Comes in rich black color
It’s a horrible thing to be left with a damaged iPhone 6s Plus. But accidents are unpredictable. Sometimes, we tend to meet with mishaps despite being careful. And when your iPhone 6s Plus gets into an accident, it’s the phone lens and screen that suffers the most. Such instances call for a total replacement or repair of the lens & screen so that you can bring the phone back to its operational self. You won’t be able to see a majority of things on your phone if the lens/screen is damaged or shattered. Our iPhone 6s Plus Black Glass Lens Screen Repair Kit is just the thing you will need here.
Call 866-233-6460 or email [email protected] and one of our friendly USA-based agents will assist you with whatever you need. Also be sure to check out our FAQs for further information and answers to common questions. If you are looking to place a wholesale order, you can apply for an account by clicking here.
If you want to attempt the repair yourself here are Repair Instructions:
The specific repair for your device may vary.
Viewing a repair video on YouTube prior to installation is recommended:
- Apply a strip of clear packing tape across the cracked screen
- Use the Pentalobe screwdriver to remove the bottom 2 screws.
- Use the suction cup to pull up the screen and remove it from the rear case
- Carefully lift up the screen assembly, disconnect the flex cables and fully remove the screen assembly from the rear case.
- Use the heat source to slowly heat up the surface of your screen to loosen the glass adhesive
- Once the adhesive softens, slide the pry tool between the glass and frame.
- Insert the wire into to the exposed gap. Slide the wire gently down the length of the screen to safely separate the glass from the LCD.
- Insert the picks as you go to keep the screen separated from the LCD.
- Once the glass is separated, carefully clean the LCD to remove any leftover adhesive, dust or glass.
- Test fit the included double-sided adhesive onto the frame, trim if necessary. Once satisfied with the fit, remove one side of the adhesive, press firmly into place.
- Pull off the remaining adhesive backing and fit the new glass screen into place.
- Press firmly on the edges to ensure a good seal between the glass and adhesive tape.
- Watch repair videos on Youtube before attempting your repair.
Tips:
- Do not force or pry the screen apart, it could result in a damaged LCD.
- Ground yourself when repairing, you should be in a static-free environment
- Do not overheat the LCD when softening the glue on the screen with a heat source
- Keep organized, the screws are of different size and length. Mark and number the screws as you take them out to prevent damage