Black
iPhone 6/6s/7 Polarizer Film (10 Pack)

iPhone 6/6s/7 Polarizer Film (10 Pack)

iPhone 6s White Glass Lens Repair Kit + Tools + Video Guide

iPhone 6s Glass Lens Screen Repair Kit + Tools + Video Guide - White

iPhone 6s Glass Lens Screen Repair Kit + Tools + Video Guide - Black

$14.95
SKU
1-AP-2278-TK3145-KIT
In stock
Quantity:    - +
Compatibility
  • Apple iPhone 6s
  • iPhone 6s A1633
  • iPhone 6s A1688
  • iPhone 6s A1700
  • iPhone 6s 16, 64 and 128 GB Models
Features
  • High-quality glass lens screen repair kit for iPhone 6S
  • Comes with essential tools including Small Phillips Screwdriver, Small Flathead Screwdriver, iPhone 5-Point Pentalobe Screwdriver, Plastic Opening Tools, Suction Cup, Nylon Spudger, Fine Tip Curved Tweezers, Micro Fiber Cleaning Cloth, SIM Card Ejection Tool
  • Designed particularly for the iPhone 6S
  • Comes in an elegant black shade
Product Description

Has your iPhone 6S been in an accident? Now that’s bad. And when a phone gets in an accident, the first thing that has to bear the maximum damage is the phone screen & lens. It’s quite possible that you have ended up with a damaged phone screen. The screen is an essential feature of any iPhone. You will have to repair or replace the screen immediately. This is where our iPhone 6S Glass Lens screen repair kit will come in handy. It will save you from wasting time and money on a technician, here you will get all the tools to carry out the repair work yourself. 

Call 866-233-6460 or email [email protected] and one of our friendly USA-based agents will assist you with whatever you need. Also be sure to check out our FAQs for further information and answers to common questions. If you are looking to place a wholesale order, you can apply for an account by clicking here.

If you want to attempt the repair yourself here are Repair Instructions:

The specific repair for your device may vary.

Viewing a repair video on YouTube prior to installation is recommended:

  1. Apply a strip of clear packing tape across the cracked screen
  2. Use the Pentalobe screwdriver to remove the bottom 2 screws.
  3. Use the suction cup to pull up the screen and remove it from the rear case
  4. Carefully lift up the screen assembly, disconnect the flex cables and fully remove the screen assembly from the rear case.
  5. Use the heat source to slowly heat up the surface of your screen to loosen the glass adhesive
  6. Once the adhesive softens, slide the pry tool between the glass and frame.
  7. Insert the wire into to the exposed gap. Slide the wire gently down the length of the screen to safely separate the glass from the LCD.
  8. Insert the picks as you go to keep the screen separated from the LCD.
  9. Once the glass is separated, carefully clean the LCD to remove any leftover adhesive, dust or glass.
  10. Test fit the included double-sided adhesive onto the frame, trim if necessary. Once satisfied with the fit, remove one side of the adhesive, press firmly into place.
  11. Pull off the remaining adhesive backing and fit the new glass screen into place.
  12. Press firmly on the edges to ensure a good seal between the glass and adhesive tape.
  13. Watch repair videos on Youtube before attempting your repair.

Tips:

  • Do not force or pry the screen apart, it could result in a damaged LCD.
  • Ground yourself when repairing, you should be in a static-free environment
  • Do not overheat the LCD when softening the glue on the screen with a heat source
  • Keep organized, the screws are of different size and length. Mark and number the screws as you take them out to prevent damage
Guides