iPhone 8 Replacement Battery
iPhone 8 A1863 (GSM/CDMA)
iPhone 8 A1905
iPhone 8 A1906
- High-quality iPhone 8 Battery Replacement
- Capacity: 1821 mAh (6.96 Wh)
- The Zero Cycle battery has been UN38.3 Certified, which means that the battery has been tested in various situations.
- It comes at a much lower cost so that a battery replacement does not affect your budget.
- The installation of the battery in your phone is easy and quick.
- The battery has been designed for iPhone 8. Hence, it will fit perfectly.
- It will increase the battery backup of your phone.
- Placing an order is easy and the delivery is quick.
This is the iPhone 8 Replacement Battery. Replace an old, dead or dying battery in your iPhone 8 with a brand new one from Fixez.com.
Li-Ion batteries only have a limited number of cycles before they can no longer maintain an adequate charge. A typical battery has about 500 cycles before it is unable to maintain a charge of at least 80% of its original capacity. Made from new materials, our batteries have zero cycles ensuring the maximum number of cycles available to you.
| Check | Features | |
|---|---|---|
 |
Zero Cycle Count, therefore you have the maximum amount of cycles left | |
| |
Li-ion Cell | |
| |
Brand New materials | |
Our batteries provide you with a safe, durable and long-lasting lithium-ion battery assembly that can weather the rigors of transport & wear
| Passed | Test | |
|---|---|---|
| |
Altitude Simulation | |
| |
Thermal Test | |
| |
Vibration | |
| |
Shock | |
| |
Short Circuit | |
| |
impact | |
| |
Overcharge | |
| |
Forced Discharge |
These tests include vibration, shock, external short-circuiting, altitude/air transport simulation, extreme thermal conditions, impact, overcharge and forced discharge simulation.
The OEM Texas Instruments chip measures and maintains an accurate record of available capacity, voltage, current, temperature and other critical parameters for lithium-based batteries. Also known as a battery gas gauge, the chip determines the battery state of charge, state of health and helps to predict how long the battery is able to provide power. An inadequate battery gas gauge will result in surprise shutdowns and poor user experience.
| Features | ||
|---|---|---|
| |
Texas Instruments (TI) Chip "Gas Guage" | |
| |
Compatible iOs Battery Health notifications | |
| |
Accurate reporting to your device |
| |
Battery Adhesive included | |
| |
Pre-installed | |
| |
Convenient | |
| |
Cost-effective | |
You get up in the morning and get ready for work. In a happy mood, you take your phone from the charging point and the battery is completely charged. You put it in your bag and go to work. But when you take out your phone, the battery is already so low that you have a warning. You put it to charge and it’s full. And after some minutes, it’s again low. You go to the repair center and ask for the problem and they tell you that your battery is damaged and needs to be changed. If this is your story, you have two choices here. Either you can dig a hole in your pocket and replace it with a new one from the store or you can buy a replacement battery for your iPhone on much cheaper cost.
Call 866-233-6460 or email [email protected] and one of our friendly USA-based agents will assist you with whatever you need. Also, be sure to check out our FAQs for further information and answers to common questions. If you are looking to place a wholesale order, you can apply for an account by clicking here.
For optimal performance, be sure to calibrate your newly installed battery: Drain battery below 10%, then charge uninterrupted to 100%.